APROVECHAMIENTO DE LAS CENIZAS DE CARBÓN GENERADAS EN LA CENTRAL TERMOTASAJERO PARA LA ELABORACIÓN DE ADOQUINES ECOLÒGICOS
No Thumbnail Available
Date
2021
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
El proyecto de investigación presenta una metodología para establecer el porcentaje de remplazo de cenizas que puede realizarse en una mezcla de concreto destinada a la fabricación de adoquines, determinando así la proporción optima a implementar para mejorar las propiedades en cuanto a resistencia a la flexión y absorción de agua de los adoquines.
Posterior a ello, se realizan las respectivas pruebas a los adoquines provenientes de los distintos diseños de mezcla que contienen cierto porcentaje de cemento, reemplazado por ceniza (5%, 10%, 15% y 20%) y a nuestra mezcla patrón, la cual no contiene ceniza. La dosificación que presentó mejores resultados en cuanto a resistencia y superó el valor de resistencia al cual se había diseñado la mezcla, fue la mezcla 2 (10%), obteniéndose una resistencia a los 28 días de 6,1Mpa y una absorción de agua de 3,03%.
La confección de adoquines ecológicos realizados con cenizas volantes, en el aspecto de costo-beneficio, resulta factible económica y ambientalmente. Considerándose que se presenta una reducción notable de cemento, con lo cual se logra una menor inversión en cuanto a materia prima requerida; se produce un beneficio al medio ambiente ya que se está reutilizando un residuo peligroso para el mismo. Por último, se obtiene un adoquín con resistencias mayores a las estipuladas en la norma y de buena apariencia.
ABSTRACT
The research project presents a methodology to establish the percentage of ash replacement that can be carried out in a concrete mix intended for the manufacture of pavers, thus determining the optimum proportion to be implemented to improve the properties in terms of flexural strength and water absorption of the pavers.
After that, the respective tests were carried out on the pavers from the different mix designs that had a certain percentage of cement replaced by ash (5%, 10%, 15% and 20%) and on our standard mix, which did not contain ash. The dosage that presented the best results in terms of resistance and exceeded the resistance value for which the mix had been designed was mix 2 (10%), obtaining a resistance at 28 days of 6.1 MPa and a water absorption of 3.03%.
The production of ecological paving stones made with fly ash, from a cost-benefit point of view, is economically and environmentally feasible. Considering that there is a notable reduction of cement, which results in a lower investment in terms of raw material required; there is a benefit to the environment since a waste that is hazardous to the environment is being reused. Finally, we obtain a paving stone with a resistance higher than those stipulated in the standard and with a good appearance.
Palabras Clave: Cenizas volantes, adoquines ecológicos, concreto, mezcla y modulo rotura.
Keywords: Fly ash, ecological pavers, concrete, mix and modulus of rupture.